Tuesday, October 28, 2014

Magnetic levitation

Some students wanted to build a toothbrush holder that floated a toothbrush in mid air to avoid contamination.
I build a prototype to see if it was possible to implement the control system in software.

This project allow a small permanent magnet to be levitated by a electro magnet.
Since static passive magnetic levitation is not possible a HALL effect sensor
 is used to constantly regulate the magnetic field.
To achieve stability a software based PID controller is used.
5 potentiometers is used to control the PID parameters.
This is the Arduino code for the project

Posted by at

4 comments:

  1. UnknownNovember 21, 2015 at 9:42 AM

    Can you please send your email at ultimateavengers100@gmail.com? I would like to discuss with your regarding this project. please do reply as soon as possible :)

    ReplyDelete
  2. Quán Ngon Sài GònApril 14, 2016 at 11:28 AM

    This comment has been removed by the author.

    ReplyDelete
  3. UnknownOctober 8, 2016 at 1:38 PM

    Where is the biquad.h file?

    ReplyDelete
  4. AnToNyApril 4, 2026 at 4:55 AM

    Channel rugged confidence with the Rip Wheeler black shirt a sharp, timeless piece inspired by bold Western attitude. Its deep black tone and clean, powerful design make it effortlessly versatile, while the iconic style brings a strong, masculine edge to your look. Perfect for fans of standout fashion, this shirt delivers a sleek, commanding presence that works from casual days to nights out, keeping your style both classic and unmistakably bold.

    ReplyDelete

Subscribe to: Post Comments (Atom)